|
I ended up using plywood for the base for some added strength, and attached
it with 1x2 boards to help bear the weight of the cabinet.
|
 |
|
The swooping top is attached with carriage bolts.
|
 |
|
The control panel in this picture is a mock-up from the prototype so I could
test the "playability."
The actual control panel will probably be an inch or two wider than this,
and built from Melamine.
|
 |
|
Here is a close-up of a joint made with pocket screws.
The monitor shelf is made of plywood for strength.
You can see the back panel door with hardware to lock it in place.
|
 |
